Buying a home is typically the largest investment most of us will ever make. Nothing is more important, in my opinion, than thoughtful consideration of the many issues that go into buying a home.
Here are some questions to ask yourself as you consider buying a home, whether it’s your first home or one of many.
It’s not as easy as you may think to sell your home in this market for the best price and terms. Take this class to learn all you need to know to sell your home. We will discuss the challenges of selling in a quickly moving market; the importance of the right pricing strategy; the actual cost to sell a home; negotiation tips and techniques and how to navigate the entire process. You will leave the class with information on the current real estate marker in your area, how to prepare your home for sale, how to choose a real estate broker and an offer of a free comparative market analysis of your home.
Registration at Arapahoe Community College website.
Sat, Sep 29, 10 a.m.-12:30 p.m. Littleton Campus
INDS 1002F01-68163 $25
Sat, Oct 6, 10 a.m.-12:30 p.m. Littleton Campus
INDS 1002F02-68164 $25
Sat, Nov 10, 10 a.m.-12:30 p.m. Littleton Campus
INDS 1002F03-68165 $25
Sat, Dec 1, 10 a.m.-12:30 p.m. Littleton Campus
INDS 1002F04-68166 $25
It can be very confusing these days when you go to the hardware store to buy a light bulb. It used to be you just chose the wattage bulb you needed and put it in the fixture. I hope the information below helps you find the best bulb for your application.
Read below to understand how each light bulb produces light and check out the table I created below to compare one bulb to the other.
How is the light produced?
An electric current passes through a tungsten filament, heating it to a temperature that produces light.
It is an advanced form of incandescent light. However, the tungsten filament is encased in a quartz envelop which is filled with a halogen gas.
CFL (Compact Fluorescent)
An electric current is driven through a tube containing argon and a small amount of mercury vapor. This generates invisible ultraviolet light that excites a fluorescent coating (called phosphor) on the inside of the tube, which then emits visible light.
LED (Light Emitting Diode)
An electrical current passes through a microchip, which illuminates the tiny light sources we call LEDs and the result is visible light.
Light Bulb Comparison Chart
* Did you know that the original Easy Bake Oven used a 100 Watt incandescent bulb to produce the heat required to bake?
Shut down and drain your system around October 15th.
Note: If a hard frost is forecast in your area before you have shut down your sprinkler system, your back flow system must be protected. You can protect your back flow device by covering it with some type of insulation.
Shutting Down Your Sprinkler System (PDF with instructions and graphic)
When I have a client who is buying a home. I strongly recommend that they replace the entry door knobs and deadbolts on their home as soon as reasonably possible. There is no way to know who the previous owners have given a key to. For personal safety alone, this is a task that should not be delayed.
Types of Cylindrical Door Knobs
Privacy lock (aka bedroom) – has a button or thumb turn on the inside knob, which locks the door so it cannot be opened from the outside.
Passage (aka closet and hall) – cannot be locked and is typically used on closets and hallway doors.
Keyed Lockset (aka entry) – can be locked or unlocked from both sides of the door by usin g a key, a button or a throw latch depending on the type.
Dead bolt – This is an auxiliary lock that is used to improve security. A double cylinder dead bolt requires a key on both sides of the door to lock or unlock the door.
Keyed Alike – this is when all locksets and deadbolts use the same key to lock/unlock. When replacing locksets/deadbolts on more than one exterior door you can purchase multiple sets that are keyed alike. Look for matching numbers on the back of the packaging.
Steps to Changing a Doorknob
1. Detach the trim or rose (the ring of metal between both doorknobs and the door) by removing the two screws that hold it on. In newer doorknobs, this does not exist.
2. Remove two more screws under the trim. These are long screws that attach the two doorknobs on either side of the door.
3. Pull the doorknobs apart and remove them from the door.
4. Remove the two screws that hold the bolt (the locking mechanism), which remains attached to the door, and extract the bolt or throw.
Note: If you are replacing your doorknob with the same brand, you may not need to change this portion out.
5. Look at the metal strike plate attached to the frame around the door (this is what catches the bolt). If the strike plate is not loose and is the right color, leave it there. Otherwise, detach it by removing its screws.
6. Insert the new bolt into the door and screw it into place. Remember to face the slanted side toward the direction the door closes.
7. Insert the doorknob on both sides of the door, making sure the two are aligned so that the long screws can hold them together.
8. Tighten the screws gradually, alternating each one so that the doorknobs come together evenly.
To increase the life of your water heater here are some recommendations:
#3 is one of the recommendations I can help you with. Luckily, repairing screens is so simple it’s crazy not to do it today.
Repairing a plastic or fiberglass screen
Most screens today are made from plastic or fiberglass and small holes can easily be patched.
You can purchase a simple patch with self-sticking adhesive on one side from your local hardware story. The patch comes in a 3″ x 3″ square and can be cut to size. Apply the patch directly over any small hole or cut in the screen and you’re done!
For really small holes you can simply use a small amount of household cement, the patch will be next to invisible.
Repairing metal screens
Although metal screens are much less common they are still around on many homes. But repairing them can be just as easy.
You can purchase a ready made metal screen repair patch or you can cut a patch from an old screen. If you’re cutting a piece of screen yourself it should be at least 1/2″ – 1″ larger on all sides than the hole you’re repairing.
Unravel several strands from the patch and if necessary bend the strands along the edges.
Slip the bent strands of the patch through the screen and fold them over on the opposite side to hold the patch in place.
A small amount of household cement on the ends of the strands may help keep them in place over time.
If you’re screen is damaged beyond repair you can easily replace the screen by following some simple steps. Here’s a link to my blog post that will walk you through the steps.